Kombinéiert radial/axiallager: NX Serie
| Bezeechnung | Dimensiounen (mm) | Basis Luede Bewäertungen | Recommandéiert banneschten Ring Bezeechnung | Gëeegent Schnapp Réng Bezeechnung | |||||||||
| fir Ueleg ze schmieren | fir Fett Schmieren | Fw | D | C -0,25 | C1 | dw e8 | r min. | radial | axial | ||||
| dyn. Cr KN | stat. Cor KN | dyn. Ca KN | stat. Coa KN | ||||||||||
| NX7-TV | NX7-Z-TV | 7 | 14 | 18 | 4.7 | 7 | 0.3 | 2,85 | 2,65 | 3.15 | 4.3 | - | WR14 |
| NX10 eng | NX10-Z Eng | 10 | 19 | 18 | 4.7 | 10 | 0.3 | 4,45 | 3.7 | 4.6 | 7.2 | IR6X10X10-IS1 | WR19 |
| NX12 eng | NX12-Z Präis | 12 | 21 | 18 | 4.7 | 12 | 0.3 | 4.8 | 4.3 | 4,85 | 8.2 | Spezifikatioune vun IR8X12X10-IS1 | WR21 |
| NX15 eng | NX15-Z Präis | 15 | 24 | 28 | 8 | 15 | 0.3 | 10.7 | 12.7 | 5.6 | 10.4 | IR12X15X16 | WR24 |
| NX 17 | NX17-Z Präis | 17 | 26 | 28 | 8 | 17 | 0.3 | 11.9 | 15 | 5.8 | 11.5 | IR14X17X17 | WR26 |
| NX20 eng | NX20-Z | 20 | 30 | 28 | 8 | 20 | 0.3 | 13 | 17.5 | 7 | 14.7 | IR17X20X16 | WR30 |
| NX25 eng | NX25-Z Eng | 25 | 37 | 30 | 8 | 25 | 0.3 | 14.9 | 22.4 | 11.1 | 24.3 | Spezifikatioune vun IR20X25X16-IS1 | WR37 |
| NX30 eng | NX30-Z | 30 | 42 | 30 | 10 | 30 | 0.3 | 22.6 | 36 | 11.7 | 28 | IR25X30X20 | WR42 |
| NX35 eng | NX35-Z Eng | 35 | 47 | 30 | 10 | 35 | 0.3 | 24.3 | 41,5 | 12.4 | 32,5 | IR30X35X20 | WR47 |
